How To Use Light Meters
How To Use Light Meters. Turn the knob around the white dome of your light meter to make it protrude. 03 dial the exposure on your camera.
When using your meter, simply hold it out in front of your camera. When shooting landscape photography all that is needed to achieve perfect exposure is an incident light meter. Light meters contain a sensor that converts the light energy into an electrical charge that can give the user a reading.
To Take An Incident Light Reading, Place The Light Meter In The Same Light As The Subject.
A light meter can read the ambient light in a scene, or the direct light from a light source and calculate the correct shutter speed and aperture values required to capture an accurate exposure. There are two types of light meter: A light meter is a device which takes a measurement of the intensity of light in front of it and provides a reading which can be translated to ev stops, suggested lens aperture and shutter speed, or both.
Reflected Light And Incident Light.
If you can’t place a gray card in the key light, you can’t use your incident meter, and there isn’t anything in the scene that you recognize as midtone value, there is still a way to get your readings! Switch your camera to manual mode and choose your desired iso and aperture before you start with the light meter. Reflective meters are the one that reside in digital cameras.
After That, Switch The Knob Around The White Dome And Make It Protrude.
They usually have a number of modes, including reading light that is reflected from a subject, light that falls on a subject or scene (incident light), and the light output from flashes. Light meters are one of the most helpful and powerful tools that dps have at their disposal, but how exactly do you use them? Set your camera to manual mode, and select your preferred iso and aperture.
03 Dial The Exposure On Your Camera.
This is why it's so important to understand how to use a light meter, a device. This kind of reading records the light falling on the subject rather than the light reflecting off the subject. To use a reflective handheld light meter, i recommend taking three readings:
Read The Results On The Meter And Set Your Camera's Shutter And Aperture To Match.
This type of light meter will first measure the amount of light reflected by the subject. After taking the cap off the sensor, simply place it on a surface where a task is carried out such as the centre of a desk. When using your meter, simply hold it out in front of your camera.
0 Response to "How To Use Light Meters"
Posting Komentar