How To Use A Car Jack
How To Use A Car Jack. Jack points are areas underneath the vehicle that are designed to be strong enough to hold the weight of the vehicle when the vehicle has been lifted. Whether you have a scissor jack or a hydraulic jack (preferred), place it under one.
When you are done, use a jack to lift the car from supports. Make sure the vehicle's engine is off, that it's in park,. Do this before using a jack of any kind.
If You're On A Highway.
Line the stands up with the pinch weld or jack point. How to use a car jack. Here, we tell you how to use both floor and scissor jacks to lift your car safely, and how to put your car on to jack stands.
Why Would You Want To Do This?
This part of how to jack up a car involves preparing the floor jack for the task. To drop the car with a hydraulic jack, twist the long handle to the left. For both jack types, always make sure your car is in first gear with the handbrake on to prevent the car rolling.
While You Can Replace A Tire Just Using A Car Jack, You Should Use Jack Stands When Doing Any Work Underneath Your Vehicle.
Jack the car up gradually. Jack up the vehicle using a solid jacking point, leaving enough room for the jack stand to support the car. Do this before using a jack of any kind.
If You're Going To Be Working Under The Car You Should Also Use Axle Stands, Just In Case The Jack.
Whether you have a scissor jack or a hydraulic jack (preferred), place it under one. When you are done, use a jack to lift the car from supports. Use the floor jack to hoist the vehicle.
Park The Car On Level Ground On A Paved Surface, If Possible.
The pressure relief valve of the jack should be closed. If lifting the entire front or rear, choose a jack point in the center of the front or rear suspension or frame. When using jacks and jack stands, make sure that they have adequate weight capacity.
0 Response to "How To Use A Car Jack"
Posting Komentar